Kit Upgrade para Sistema Cyclone

$ 589.90 Oferta Ahorre
The New Double-Stack Feature allows for more balls to be in the bottom of the Cyclone Feed. By putting more balls in the bottom of the loader it means that fewer shots will be skipped. Along with the Double-Stack top paddle, we also include the tried and true standard Squishy Paddle Top. You can't find another aftermarket set of paddles with three paddles! Only the TECHT Squishy Paddles give you the option of which top you want to use. 

The "DS" or Double-Stack Feature allows for two stacks of balls to be lined up and ready to be loaded. This means no skipped shots for the first 8-10 shots. This is great for people who fire in bursts and want less skipped shots. 

The "+" or "PLUS" means that for a limited time we are including both the new DS (Double-Stack) top paddle, along with Original Squishy Paddle Top that is similar is shape to the stock top paddle. The stock style top is best for those people wanting to shoot at the highest rates of fire. They allow for higher rates of fire, but also allow for more pop corning balls and the potential for more skipped shots. We give you the option of deciding what top paddle to run based on your style of shooting.

The Original Style Squishy Paddles are best for those shooting at high rates of fire, and or FULL AUTO. THE DS Squishy Paddles are best for those who shoot slower than 15 BPS and shoot in burst or semi modes.

The Vortex Mod was the FIRST hard-coated and teflon impregnated aluminum internals to replace the stock plastic internals of the Tippmann Cyclone Feed to be released in the paintball industry.

The Vortex Mod SS now incorporates a stainless steel axle and design changes to make it the most
durable and easiest upgrade to install.

The popularity of electronic controls in Tippmann A5, X7, and 98's that allow for rates of fire of up to 30 BPS, has warranted the need for higher performing internals for the cyclone feed that will allow the loader to keep up with the marker.

Our testing has shown that the Vortex Mod SS will allow the Cyclone feed to work at lower pressures, feed faster, and virtually never wear out. If it does we will replace the worn parts for life.

While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone faster and more reliable.

Since its release, the Vortex Mod has been the most widely used, and most trusted name in cyclone upgrades.

The Vortex Mod SS is specifically designed to be the fastest, smoothest actuating, and most durable/long lasting upgrade available. And did we mention it was easy to install?

The "Original" Vortex Mod was by far the most durable and highest performing cyclone upgrade available. In the past we said that if our Vortex Mod wasn't the best Cyclone Ratchet Upgrade in the world that we would redesign it to crush the competition, and that's exactly what we did.

With a new stainless steel axle and design refinements it is now far and away the "best of the best".

The Vortex Mod SS will feed upwards to 30+ balls per second and continue to load down to pressures as low as 150psi.

Stock parts only feed up to 15 balls per second and only down to a pressure of 400 psi.


The Quick Exhaust Piston Housing or QEPH was designed to increase the loading speed of the Tippmann Cyclone Feed. The QEPH quickly exhausts the air that is used to drive the Cyclone Feed once it has advanced the loader. By exhausting the excess gas both before and after each shot, the QEPH allows the Cyclone Feed to cycle faster.

The QEPH is a forward and reverse exhaust tube. It exhausts the air in front of the piston during the piston stroke and behind the piston at the end of the piston stroke. Venting the air in front of the piston in the early part of the stroke means that less pressure is needed to advance the loader and venting the air behind the piston allows the loader to return faster.

The QEPH is 100% made in the U.S.A.

It is machined from aircraft grade aluminum and is then annodized and teflon coated for the smoothest and most durable finish.

If you want your Cyclone Feed to keep up with the potential speed of your marker, then the TECHT QEPH is a must have.

The QEPH now comes optional "blocker orings" to help keep out debre when playing in extreme environments.

If you want your Cyclone Feed to keep up with the potential speed of your marker, then the TECHT QEPH is a must have.

The QEPH now comes optional "blocker orings" to help keep out debre when playing in extreme environments.


The Lightening Rod is designed to work with the stock parts or in conjunction with our Vortex Mod and Quick Exhaust Piston Housing. Together, the parts will yield higher rates of fire and increased air efficiency. Users have reported feed rates as high as 30-35 balls per second when using the the Lightening Rod in conjunction with the other TechT Cyclone Feed Upgrades.

The secret to the performance gains is the brass bushing located where the ratchet and piston rod met. This bushing creates less friction than the stock's design with just a plastic hole. This bushing creates a smoother and faster action, increasing the speed and reliability of the Cyclone.

The Lightening Rod is made of 7071 grade anodized billet aluminum which is stronger than any other like it. This stronger aluminum will not bend or break like the plastic, giving it a much longer wear life. It also allows all of the power needed to drive the Cyclone to be directed straight through the Lightening Rod to the ratchet system and not be lost in the bending action like the stock.

Our Testing has shown:

1. With the Vortex Mod and Lightening Rod, your Cyclone will continue to feed at lower pressures. This means little to no manual feeding when you get low on air.

2. Due to the use of teflon and our modified ratchet and axle design your loader will have less internal friction with each cycle, yielding higher potential rates of fire and less wear and tear.


Bought together

Estos productos te pueden interesar: